While there is no clear distinction between handicap levels, it’s safe to say that you are a mid handicapper if your handicap level ranges from 8 to 20. If you want to become a low-handicap player, you have to further train yourself. However, you can hone your performance faster if you have the right equipment. Here, we’ll talk about the best irons for mid handicappers.
When it comes to buying any golf club, the concept of center of gravity (CG) is important. You’ll often see this in stores both online and offline, but it’s not just some overhyped feature. When the CG of an iron is located around its clubhead, the clubface becomes stable enough to produce consistent shots in terms of distance and angle. If the iron has a CG placed at the lower portion of the head, it becomes easier for you to have high-launch shots.
Grooves are a significant element in creating ball spin. You see, the ball requires a good combination of spin and speed for a stable ball flight. In other words, the grooves on irons create drag and force to take the ball up into the air. Without grooves, it would be not as easy to control the ball trajectory.
However, the United States Golf Association (USGA) has a set of rules and regulations regarding grooves in golf clubs. Thus, manufacturers have to follow the single equation as identified by USGA if they want to design whatever groove pattern they have in mind. In fact, you can check the websites of these golf equipment manufacturers to see the cross-section illustrations of the groove patterns they come up with.
Typically, laser etching located between the club grooves is the chosen method to improve the spin even with the USGA limitations. Likewise, the manufacturers tend to attract possible buyers of their golf clubs by stating the supposed durability of the materials they use. Moreover, precision cutting in creating the grooves helps in marketing their irons.
Here is a related video on grooves:
Just like shoes, the sole of a golf club is located the lowest section. It’s the part of your club that is closest to the ground when you are adjusting your stance before you hit the golf ball. As for the sole grind, this is the part that has been ground into the sole.
In other words, this is the relief and contour located in the sole that adds forgiveness. When you pick your irons, ensure that they have wide soles. This sizable sole width can effectively lessen the chances of fat shots, which is when the club hits the ground before making an impact with the golf ball. When the club hits the ground first, all of the speed and power you generated through your swing will go to waste.
When it comes to the shaft, we have to discuss not only the material it is made out of but the flex that it will offer. Flex refers to how much the iron shaft bends as you swing your golf club. The faster and more powerful your swing, the more likely your shaft will bend – and this is where shaft ratings come in.
When the shaft of your golf club begins to flex, the clubhead position will be adjusted. You need to get the right flex because you want to hit the golf ball with a square clubface. If you use the wrong flex, your swing could result in an erroneously placed clubface that leads to off-center shots.
To complement your swing speed, you have to pick among the shaft levels: extra stiff (XS), stiff (S), regular (R), senior or amateur (A), and ladies (L). If you have a fast swing speed, you should use a stiff shaft to improve the stability of your swings. If you have a relatively low swing speed, you should pick an iron with a flexible shaft to help you with increasing the ball speed and distance.
The material used for the shaft of your iron will affect its flex. Here, you can choose between a graphite shaft and a steel shaft. The graphite shaft is considerably lighter than a steel variant. Due to this lightweight characteristic, a graphite shaft will be easier to swing quickly. Thus, a better swing speed will improve the ball speed and distance.
On the other hand, we have shafts made of steel. These are generally more durable and heavier than the graphite counterparts. However, some manufacturers produce steel yet thin shafts to keep their weight similar to clubs with graphite shafts.
While the steel shaft won’t easily help you increase your swing speed, it does offer a better feel and control over the clubhead. Likewise, the steel material could give golfers more feedback from which they could analyze the quality of their swings. This is due to how vibrations upon hitting the golf ball can travel from the clubhead to the steel shaft.
The first irons we have come from Callaway. To give them optimal durability, the irons underwent a two-piece construction process that involved dual heating. These are designed for use for both left-handed and right-handed players. You can also choose between a graphite shaft and a steel shaft to suit your play style. Similarly, the iron set comes in a regular flex or a stiff flex.
One of the innovations applied to the Callaway XR Iron Set is the 360-Degree Face Cup Technology. If you hit the clubface at the lower section, a spring-like effect could help improve the ball speed. Likewise, Callaway notes that other hitting the ball with the other sections of the clubface will still generate decent ball speeds.
Moreover, these irons have a low CG that is suitable for golfers who want to increase the trajectory of their shots. No matter the loft angle they choose, this low CG would likely help with high-angle shots. Similarly, the Callaway XR Iron Set has a high moment of inertia (MOI), which makes it very forgiving.
It is common for mid handicappers to commit off-center shots. These general mistakes lead to problems with both ball direction and ball distance. With a high MOI, the irons won’t twist so much. Even if you have a mishit, the added resistance to twisting will help in maintaining the speed and direction of the ball.
Similar to the first two products, this irons set from Adams can either have steel shafts or graphite shafts. You cannot configure the shafts any further, but they should perform well enough. In addition, this is offered in both left-handed and right-handed orientations.
Adams uses its Cut-Thru Slot design on the New Idea Hybrid Irons Set. Basically, sole slots found at the rear of the clubface that not only improves ball speed and distance but also ball launch. In particular, these enhancements will be noticeable the most when you commit off-center shots.
Consequently, a wrap-around slot enables a sizable sweet spot. Thus, mishits and on-center shots result in better ball speeds. Instead of the usual long iron for long-distance and low-angle shots, this Adams set of irons uses hybrids. Of course, a cavity back is utilized for added forgiveness.
Up next, we have the RSi1 Iron Set that comes with either graphite shafts or steel shafts. You can pick between a regular or stiff flex, and there are variants for left-handed and right-handed players. Similar to the Callaway XR Iron Set, this employs a distinct feature to the clubface.
Known as the Face Slot Technology, this is utilized in the 3-8 irons. Simply put, TaylorMade put two slots close to the heel and toe sections of the face to ensure an equal flex no matter where the ball comes in contact with.
Similarly, the 3-7 irons have what TaylorMade calls the ThruSlot Technology. Essentially, the speed pocket has been redesigned in such a way that a significant portion of the clubface could flex upon impact. This extension of the speed pocket from the clubhead into the cavity could help increase the ball speed.
Moreover, the ThruSlot technology could help in maintaining high-launch shot and better ball flights in general. As for the 8-iron, it has a cavity back that creates a somewhat larger sweet spot. In addition, this reduces the loss of distance and speed occurring from off-center shots.
Finally, we have an iron set from Cobra Golf that is primarily designed for high-launch shots. In addition, the irons are meant to perform well even in tough lies through its progressive construction method. You should not be worried when using the long irons since heel-toe weighting is utilized.
This feature is similar to perimeter weighting as the weight is shifted away from the center of the clubhead. Essentially, your straight shots could have reduced distance loss as they become more stable. Moreover, the Speed Channel technology located at the clubface ensures a thin perimeter.
Along with the cavity backs, this feature should increase ball speed and distance. Also, the shot irons from this Cobra set have U-grooves that deliver the right ball spin. While the feedback for both on-center shots and off-center shots are discernible, they aren’t particularly satisfying. Still, the overall feedback and feel are good enough.
Overall, our favorite irons for mid handicappers are none other than the Callaway XR Iron Set. While shaping your shot is not going to be easy upon first use, you should get the hang of it after some time. Likewise, the somewhat average feedback still allows you to notice when you made an off-center shot or not.
Furthermore, we believe that the Callaway XR Iron Set is a pretty good investment due to its durability. The dual-heating and two-piece construction gives the irons sufficient sturdiness. In addition, the 360-Degree Face Cup Technology is fantastic. Whether it’s the center or the side of the clubface that hits the ball, distance loss is not that drastic.
Also, mid handicappers will benefit a lot from the low CG and the high MOI. If you want to improve the ball flight and speed, this should be your choice. Of course, the sleek and modern design can help in giving you more confidence in the golf course.
We hope that our guide helped you in picking the right irons for your next game. If you have any queries, do give us a comment.
I manage this site because I am passionate about golf. I know that learning the sport seems difficult, so I’m here to help anyone that might be interested.